Flash Tasmota

Step 1: Open ZbBrige Pro

Remove the rubber feets by using e.g. a scalpel at the bottom and unscrew the 4 small phillips screws beneath.

Step 2: Prepare board

Solder 5 pins to the GND, GPIO0, RX,TX and 3V pinholes.

Step 3: Connect USB-to-TTL adapter

Connect using the following layout:

ZbBridge	USB-to-TTL adapter
3V3	3V3
TX	RX
RX	RX
GPIO0	GND
GND	GND

Step 4: Flash Tasmota

Option 1: Webinterface

Go to the Tasmota install website and select the options Tasmota32 Sonoff-ZigbeeBridgePro and All, press connect and flash the firmware.

Option 2: Manual install via Tasmotizer

Download the newest version of the Tasmota firmware for Zigbee Bridge Pro and flash using the Tasmotizer application (tasmotizer-1.2.exe).

(Used version at date of creation: tasmota32-zbbrdgpro.bin)